Ricoh Aficio BP20N, Руководство пользователя

Страница: 221 / 249

System Administration Guide Page 4-3
Ne
tw
o
rk
In
s
ta
lla
ti
on
U
s
ing
Int
e
rnet
S
er
v
ic
es
(
c
io B
P
20N)
Using BP20N
Introduction
BP20N uses the embedded HTTP Server on the BP20N to allow communication
with
t
he BP20N if you have a Web Browser with access to the Internet or Intranet. By
entering
the IP Address of the BP20N as the URL (Universal Resource Locator) in the
Browser,
direct access to the BP20N is available.
NOTE: Microsoft Internet Explorer version 4.x or later should be used. Other
browsers may work, but could produce unexpected results.
Many of the selections and settings needed to install BP20N on a network can be made
using Internet Services, eliminating steps that would otherwise need to be performed at the
BP20N Control Panel.
Many of the features available within Internet Services will require an admin user name and
password. A user will only be prompted for an admin name and password once in a single
browser session.
Before the Internet Services feature can be used for installing BP20N on a network it
must be enabled. There are two stages required to enable Internet Services:
¾
Network Communication Setup
This requires the BP20N to be setup for Internet Services.
¾
Enable Internet Services
¾
Make settings to the appropriate network
NOTE: When making more than one configuration change please complete all the
changes in one go and then carry out a reboot.