Ricoh Aficio BP20N, Руководство пользователя

Страница: 227 / 249

System Administration Guide Page 4-9
Ne
tw
o
rk
In
s
ta
lla
ti
on
U
s
ing
Int
e
rnet
S
e
rv
ic
es
(
BP
20N)
SNMP
Use these instructions to configure the Simple Network Management Protocol (SNMP) using
BP20N.
Configure SNMP
To configure SNMP, perform these steps:
¾
Enable BP20N (see “Enabling Internet Services” on page 4-5 ).
¾
At the BP20N Home Page for the BP20N , select the [Network
Administrator] tab.
¾
Click SNMP menu in the left frame
¾
Check the SNMP Configuration Traps details are correct. If any of the details of SNMP
Traps are incorrect then enter the correct information.
¾
Click the [ Apply ] button to implement any changes.
¾
Click Community Names link under the top menu.(
¾
Check the SNMP Configuration Traps details are correct. If any of the details of SNMP
are incorrect then enter the correct information.
¾
Click the [ Apply ] button to implement any changes.(
NOTE: Click the [Reset] button to cancel any changes made and return to the
previous values.
1
2
3
4
5
6
7
8