4
4-21
Network Setup
N
OTE
:
Windows (SMB) printing runs over TCP/IP, so TCP/IP must be configured on
the Fiery 3850C and on workstations that use Windows printing.
Server Name
—The server name is the name that will appear on the network. It can,
but does not have to, be the same name as the server name assigned to the Fiery 3850C
(see page 4-3).
Comment
—You can enter information about the printer, up to 15 characters. These
comments are listed in the Properties of the Fiery 3850C in Network Neighborhood.
Lowercase letters are allowed in this field.
Domain or Workgroup
—Enter the workgroup or domain where the Fiery 3850C
should appear.
Auto IP
—If you have already enabled IP Auto in Protocol Setup, and selected either
DHCP or BOOTP as the protocol for obtaining an IP address, check this option to
allow the Fiery 3850C to obtain the IP address automatically for the WINS Name
Server. If you do not check this option, you can use the following two options to
specify whether to use a WINS Name Server and what its IP address is.
Use WINS Server
—Select to use a WINS name server. Broadcasts from SMB devices
cannot be routed beyond their original network segment without a WINS name
server. Setting up the WINS name server is outside the scope of this manual. To find
out if a name server is available, contact your network administrator.
IP Address
—Enter the IP address of the WINS name server.
Broadcasts from SMB devices cannot be routed beyond their original network segment
without a WINS name server. Setting up the WINS name server is outside the scope
of this manual. To find out if a name server is available, contact your network
administrator.
