2
2-6
Preparing for Fiery 3850C Setup
Control level scenarios
Typical scenarios of access and control, ranging from least control to strictest control,
are described in this section. Choose the scenario that best matches your site
requirements, and then refer to the corresponding number in the table for guidance on
how to configure your system for those requirements.
N
OTE
:
It is
strongly recommended
that you set
at least
an Administrator password to
prevent unauthorized changes to system settings.
1.
(Least control—
not recommended
) No designated administrator or operator
All users have equal access to all system functions including Setup, clearing the
Fiery 3850C, deleting printer fonts, setting the WebLink destination printing to all
Fiery 3850C print connections, and managing all jobs from the job management tools.
2.
A designated administrator but no designated operator
Only an administrator can perform Setup, calibration, and other administrator
functions, but all other system functions are accessible to all users, including printing
to all Fiery 3850C print connections, and managing all jobs from the job management
tools.
3.
A designated administrator and a superuser operator
Only an administrator can perform Setup and other administrator functions, and only
an operator or administrator can control jobs from the job management tools. Users
can print to all Fiery 3850C print connections.
