4
4-4
Setting up the Fiery 3850C from a Windows Computer
Print Start Page
—Specify whether the Fiery 3850C should print a start page when it is
turned on or rebooted. The Start Page displays information about the Fiery 3850C,
including server name, the current date and time, amount of memory installed, last
calibration date, network protocols enabled, and print connections published.
Enable Printed Queue
—Specify whether to enable the Printed Queue, a storage
location on the Fiery 3850C disk for recently printed jobs. You can reprint jobs from
the Printed queue without sending them to the Fiery 3850C again. If the Printed
queue is not enabled, jobs are deleted from the Fiery 3850C disk immediately after
they are printed.
Jobs Saved in Printed Queue
—Specify the number of jobs to be stored in the Printed
Queue. Jobs in the Printed queue take up space on the Fiery 3850C hard disk.
Date & Time
—Specify the system date and time, which are used on the Job Log.
Passwords
You can set, change, and remove passwords for the Fiery 3850C. Keep careful track of
the passwords you set for each.
Administrator
—Controls access to Setup; Administrator privileges also include
Operator privileges.
Operator
—Controls access to job management functions via the job management
tools.
N
OTE
:
For more information on Fiery 3850C passwords and the access privileges they
allow, see page 2-3.
