3
3-6
Performing Setup from the Control Panel
Publish Printed Q
Yes/No [Yes]
Specify whether to publish the Printed queue, which creates a storage location on the
Fiery 3850C disk for recent jobs that were printed from the Print queue. Users with
Administrator or Operator access to the job management tools can reprint jobs from
the Printed queue without sending them to the Fiery 3850C again. If you select No,
jobs are deleted from the Fiery 3850C disk immediately after they are printed.
Jobs to Save
1-99 [10]
This option appears only if Publish Printed Queue is set to Yes. Specify the number of
jobs to be stored in the Printed queue. Jobs in the Printed queue take up space on the
Fiery 3850C hard disk. If disk space is low, use a smaller value for saved jobs.
Energy Saver 1
Off/On [Off]
Specify if you want the printer to use Energy Saver 1 mode in which it only shuts
down the printer’s fuser.
Energy Saver 2
Off/60 minutes/45 minutes/30 minnutes/15 minutes/5 minutes/On [On]
Specify if you want the printer to use Energy Saver 2 mode in which it shuts down the
entire printer.
E. Saver 2 Timer
60 minutes/45 minutes...5 minutes [60 minutes]
Specify the amount of time to elapse before the printer goes into Energy Saver mode.
Time
Enter the correct system time. Enter the time based on the 24-hour clock in the form
HH:MM
(Hours:Minutes). The time is used on the Job Log.
Date
Enter the correct system date in the standard form for your usage. The date is used on
the Job Log.
