Ricoh Aficio AP3850C Скачать руководство пользователя страница 131

Страница: 131 / 140

6-10Administering the Fiery 3850

Cannot connect to Fiery 3850C with Fiery utilities

If users cannot connect to the Fiery 3850C, check the following:

• Fiery 3850C Setup—the appropriate network protocol must be enabled, with the

correct parameters (for example, for TCP/IP, the IP address, etc.), and you must
publish either the Print queue or Hold queue.

You can check these settings quickly by printing a Conﬁguration page.

• On the client workstation—the appropriate network protocol(s) must be loaded,

and your Windows directory should contain a conﬁgured Eﬁnl.ini ﬁle.

Cannot connect to the Fiery 3850C with the Command WorkStation

If there is a problem connecting to the Fiery 3850C, an error message is displayed.

The problem can occur:

• When the Fiery 3850C is ﬁrst turned on

• When the Fiery 3850C reboots

• When you have changed settings affecting the server address and have not

reconﬁgured the connection to the server

If you see this problem, try the following solutions, in order:

• A remote workstation running the Fiery utilities or Fiery WebTools may be

interfering by obtaining status information. If possible, close the remote application,
and try again to connect.

• Restart the Command WorkStation application and try again to connect.

• Check the conﬁguration of the connection and modify it if necessary, or delete the

Eﬁnl.ini ﬁle and start over with the process of conﬁguring the connection as
described in

Getting Started

For Windows 9x/Me, the Eﬁnl.ini ﬁle is located in \WINDOWS.
For Windows NT 4.0/2000, the Eﬁnl.ini ﬁle is located in \WINNT.

• Reboot the Fiery 3850C.

See the

Job Management Guide

for information on other error conditions.

Содержание Aficio AP3850C













































































































































Результаты поиска

Содержание Aficio AP3850C

Отзывы:

Ricoh Aficio AP3850C, Руководство по настройке, Страница: 131 / 140

Результаты поиска

Содержание Aficio AP3850C

Отзывы: