3
3-11
Network Setup options
I/O Port Setup options
Parallel Port Setup options
You must enable the parallel port in order to enter the Parallel Port Setup options and
print to the parallel port.
To configure the Fiery 3850C, choose Ethernet and enter the appropriate settings.
Since network setups are nested, the names of higher-level menus are shown in this
chapter to the left of each menu heading.
Ethernet Setup
Ethernet
On/Off [On]
Select On if you have Ethernet cabling connected to the Fiery 3850C.
Speed
Auto Detect/100 Mbps/10 Mbps [Auto Detect]
Select Auto Detect if your network environment is mixed, or if you do not know
the network speed. If you know the speed of the network to which the Fiery 3850C
is attached (10 Mbps or 100 Mbps), select it.
Parallel Port Setup
Parallel Port
On/Off [On]
Select On if you want to print through the parallel port. You can connect a single
Windows computer to the parallel port and print directly to the Fiery 3850C.
N
OTE
:
Enabling the parallel port does not conflict with using Ethernet
communication to the Fiery 3850C.
