Ricoh Aficio 2238C, Руководство по эксплуатации

Страница: 25 / 126

Initial Scanner Setup
17
2
❖ ❖ ❖ ❖
Mixed Original Sizes Priority
This setting determines whether
the original size is to be automati-
cally detected when originals of
different sizes are inserted in the
ADF. You can select
[ On ] or [ Off ] .
Note
❒
If the original size is specified
when scanning, this setting is
ignored.
❒
When
[ Off ]
is selected and
[ Auto
Detect ] is selected for scan size, if
originals of different sizes are
placed in the ADF, the maxi-
mum size will be detected as the
scan size.
❖
❖ ❖
❖
Original Orientation Priority
Select the default for original
placement orientation. When orig-
inals are always positioned the
same way, select that orientation
as the default to make operation
easier.
Reference
p.39 “Original Orientation and
Scan Area”
❖
❖ ❖
❖
Change Initial Mode
If you use the settings which are
d i s p l a y e d w h e n m o d e s a r e
cleared, reset, or immediately after
the operation switch is turned on
as the initial mode, select
[ Stand-
ard ] .
Select [ Program No.10 ] when you
use the settings stored in Program
No. 10 as the initial mode.
❖ ❖ ❖ ❖
Auto Colour Select: Mode Priority
Select either [ Full Colour ] or [ Black &
White ]
for the image quality when
[ Scan Type ] is set to [ Auto Colour Se-
lect ] .
❖ ❖ ❖ ❖
A.C.S. Sensitivity Level
Set the sensitivity level for detect-
ing colours/black and white to
scan the original when
[ Scan Type ]
is set to [ Auto Colour Select ] .
Selecting a custom size
When selecting [ Custom size ] as the
scan size, follow the procedure be-
low.
AAAA
Press [ Custom size ] on the Scan
Size Setting screen.
BBBB
Enter the original size with the
number keys.
Select and enter values for [ X1 ] and
[ Y1 ]
, and then press the
{{{{
#
}}}}
key.
CCCC
Enter the scan starting point in re-
lation to the standard scan start-
ing point.
Select and enter values for [ X2 ] and
[ Y2 ] , and then press the
{{{{
#
}}}}
key.