Series
BVA/F, BVAP/F to ASME
Page
3
9520-036-en
Revision 19
TM 10477
Edition 05/2022
Relevant documents
♦
EG-Declaration of conformity
♦
Declaration of conformity FDA & 97/48/EG
♦
Manufacturer
Declaration
ATEX
Directive
2014/34/EU
♦
Manufacturer Declaration TA-Luft
♦
Form for Safety Information Concerning the
Contamination QM 0912-16-2001_en
♦
For BVAP/F : Operating manual for actuator
♦
Depending on option, relevant drawing:
Lever elevation
Sect.
9520-00-3009
Dim.
9520-00-4009
Limit switch IFM
Sect.
9520-00-3005
Dim.
9520-00-4015
Spring return unit
Sect.
9520-00-3004
Dim.
9520-00-4014
Limit switch VDE/VDI
Sect.
9520-00-3006
Dim.
9520-00-4016
Initiator Turck
Sect.
9520-00-3007
Dim.
9520-00-4017
Locking plate
9520-00-3002
Connecting dimensions for actuatorDim.
9520-00-4179
1
Technical data
Manufacturer:
Richter Chemie-Technik GmbH
Otto-Schott-Str. 2
D-47906 Kempen
Telephone : +49 (0) 2152 146-0
Fax:
+49 (0) 2152 146-190
E-Mail :
Internet:
Designation :
Standard ball valve with one-piece ball/stem unit or
ceramic ball and stem, with plastic coating, cone
shape stem sealing, seat rings of pure PTFE, cavity
reduced as standard feature, twopiece body.
Series:
BVA/F
→ Version with lockable lever or hand
gear
BVAP/F
→ Design prepared for pneum., hydr. or
electric actuator to ISO 5211
Certified to Clean Air Act (TA Luft)
Strength and tightness (P10, P11) of the pressure-
bearing body tested to DIN EN 12266-1.
Gas-tight (P12) in the seat to DIN EN 12266-1,
leak rate A
MSS SP 25 Standard Marking System
MSS SP 72 General Service
API 598 Valve Inspection and Testing
The tests at Richter fulfils the requirements
of API 598 on principle. However this
standard contains optional, additional tests.
These tests are not object of the tests at
Richter and have to be arranged by order
with Richter (e.g. point 3.3: High Pressure
Closure Test).
Face to face:
ASME B16.10, Class 150 column 19
Flange connecting dimensions:
ASME B16.5 Class 150, raised face.
Materials :
Body material:
Ductile cast iron ASTM A395
Lining material:
PFA/PTFE
.../F
Temperature range :
See pressure-temperature diagram in Section 1.5.
Operating pressure:
From vacuum to max.250 psig (17.2 bar)
See pressure-temperature diagram in Section 1.5.
Ball vale sizes in inch:
1“, 2“ with full port
1½“, 3“, 4“, 6” with
reduced port
Installation position :
Arbitrary, with an additional relief bore in the ball/stem
units or ceramic balls a direction arrow indicates the
direction of flow.
See Section 6.3.
Weight, ball valve manually operated:
Nomi-
nal size
1“
1½“
2“
3“
4“
6“
ca. kg
5
10.8
13
17
36
53
ca. lbs
11
24
28.5 37.5
79
117
For weight of actuator, see actuator manufacturer's
manual.
Dimensions and individual parts :
See sectional drawing in Section 10
Wear parts :
Seat rings
stem seal
Ball/stem unit
Ball and stem
