Rice Lake WLS-C, Инструкция по установке и эксплуатации

Страница: 31 / 44

WLS-C Wheel Loader Scale - Operation 27
It is possible to set a factor of ±10% in relation to the calibration value. 110 indicates the maximum positive
correction to increase the weighed load, 90 indicates the maximum negative correction factor to decrease the
weighed load, and 100 means no correction factor should be set
Figure 4-5. Correction Function
4.7 Adjust Display Contrast
Use the following procedure to adjust the display’s contrast.
1. Press and hold the Print/Enter button for 3 seconds to enter the User menu.
2. Scroll down using the Partial/Minus button until you see the Contrast menu.
3. Follow the “Setting New Values” on page 30 procedure to modify the contrast value, which can be set to
a minimum value of 60, and a maximum of 160 (by lowering the value the display will fade, and
increasing the value it will darken). 110 is the normal setting.
Figure 4-6. Display Contrast Normal Setting
4.8 Language Selection
Use the following procedure to select a language.
1. Press and hold the Print/Enter button for 3 seconds in the operating screen to change to the User menu.
2. Scroll down using the Partial/Minus button until you see the Language menu.
Figure 4-7. Language Selection