Rice Lake Tracer AV Скачать руководство пользователя страница 31

Страница: 31 / 46

EDP Commands

© Rice Lake Weighing Systems

●

5.0

EDP Commands

The Tracer AV can be controlled by a personal computer or remote keyboard connected to the EDP port. Control is provided by

a set of EDP commands that can simulate front panel key press functions, display and change setup parameters, and perform

reporting functions. The EDP port provides the capability to print configuration data or to save that data to an attached personal

computer. This section describes the EDP command set and procedures for saving and transferring data using the EDP port.

5.1 The EDP Command Set

The EDP command set can be divided into five groups: key press commands, reporting commands, the

RESETCONFIGURATION special function command, parameter setting commands and transmit weight data commands.
When the Tracer AV processes an EDP command, it responds with the message

. The

response verifies that the

command was received and has been executed. If the command is unrecognized or cannot be executed, the indicator

responds with

The following sections list the commands and command syntax used for each of these groups.

5.1.1 Key Press Commands

Key press EDP commands (

Table 5-1

) simulate pressing the keys on the 2-button keypad. Most commands can be used in

both setup and weighing mode. Several of the commands serve as “pseudo” keys, providing functions that are not represented

by a key on the front panel.
For example, to enter a 15-pound tare weight using EDP commands:

1. Type K1 and press

ENTER.

2. Type K5 and press

ENTER.

3. Type KTARE and press

ENTER.

The display shifts to net mode when the tare is entered.

Command

Function

KZERO

In weighing mode, press the Zero key

KGROSSNET

In weighing mode, press the GROSS/NET key

KGROSS

Go to gross mode*

KNET

Go to net mode*

KTARE

Press the TARE key

KUNITS

In weighing mode, press the UNITS key

KPRIM

Go to primary units*

KSEC

Go to secondary units*

KLEFTARROW

In setup mode, move left in the menu

KRIGHTARROW

In setup mode, move right in the menu

KUPARROW

In setup mode, move up in the menu

KDOWNARROW

In setup mode, move down in the menu

KTIME

Press TIME/DATE key once*

KDATE

Press TIME/DATE key twice*

KDISPTARE

Press the DISPLAY TARE key*

KCLR

Press the CLEAR key*

Press number 0 (zero)*

Press number 1*

Press number 2*

Press number 3*

Press number 4*

Press number 5*

Press number 6*

Press number 7*

Table 5-1. EDP Key Press Commands

Содержание Tracer AV















































Результаты поиска

Содержание Tracer AV

Отзывы:

Бренды по названию

Популярные бренды

Rice Lake Tracer AV, Руководство по установке

Результаты поиска

Содержание Tracer AV

Отзывы:

Бренды по названию

Популярные бренды