Rice Lake Synergy 680HE Скачать руководство пользователя страница 27

Страница: 27 / 78

Configuration

© Rice Lake Weighing Systems

●

4.0

Configuration

There are two types of configuration parameters in the 680HE, setup mode parameters (or Legal for Trade configuration) and

user mode parameters (or non-legal configuration). Setup mode parameters are accessed by the setup jumper (

Section 4.1

User mode parameters are accessed by pressing the menu button and do not require the setup jumper for access.
The following sections provide graphic representations of the 680HE menu structures. Most menu diagrams are accompanied

by a table which describes all parameters and parameter values associated with the menu. The factory default setting appear in

bold type within the tables.
The audit, setpoints, accumulator, tare, time, date, Mac ID and version menus can be accessed by pressing

The top-level setpoints menu displays the setpoint value of configured setpoints and is accessible with the menu

button. Complete configuration of setpoints is under the setup menu and requires the setup jumper for access.

The setup menu is accessed with the setup jumper (

Section 4.1

ll weight related parameters must be configured prior to calibrating the unit.

4.1 Setup Jumper

In order to fully configure the 680HE, it must be placed in setup mode with the setup jumper. The setup jumper can only be

accessed by opening the enclosure.

Use anti-static protection for grounding and to protect components from electrostatic discharge (ESD) when

working inside the 680HE enclosure. Procedures requiring work inside the 680HE must be performed by

qualified service personnel only.

To place the 680HE into setup mode, remove the setup jumper (J25) and put it back in place. The 680HE enters setup mode by

accessing the setup menu and

config

displays. See

Section 4.4 on page 23

for a detailed breakdown of the setup menu.

Figure 4-1. Setup Jumper Location on CPU Board

4.1.1 Audit Jumper

The audit jumper (J24) turns setup mode access on and off. Access to setup mode is allowed by pressing

when the

audit jumper is in the ON position. When the audit jumper is in the OFF position, access to setup mode requires the removal and

reattachment of the setup jumper.

In certain Legal for Trade applications it is necessary to seal the indicator (

Section 2.6 on page 12

) to restrict access

to setup mode. Breaking of the seal terminates the Legal for Trade status of the indicator.

Note

IMPORTANT

ASSY

PN/Rev

RICE LAKE

OFF

AUDIT

RESET

LED4

J24

ASSY

PN/Reevv

RICE

E LAKE

OFF

AUDIT

RESETR

J24

J25

SETUP

Setup Jumper

(J25)

Note

Содержание Synergy 680HE















































































Результаты поиска

Содержание Synergy 680HE

Отзывы:

Бренды по названию

Популярные бренды

Rice Lake Synergy 680HE, Техническое руководство

Результаты поиска

Содержание Synergy 680HE

Отзывы:

Бренды по названию

Популярные бренды