Rice Lake Synergy 680HE, Техническое руководство

Страница: 26 / 78

680HE Synergy Indicator
20 Visit our website www.RiceLake.com
3.4.17 View and Edit Date Value
To view and edit the current date:
1. Press .
audit
displays.
2. Press multiple times until
date
displays.
3. Press to view the current set date.
4. To edit the date value use the following method:
• Press to clear the current date
• Use the numeric keypad to enter the new date value and press to accept the desired value
5. Press to return to weigh mode.
Date is backed up by the internal battery and is not lost if the main power is interrupted.
See Section 4.4.5 on page 30 for date formatting options.
3.4.18 View Configured Setpoint Values
See Section 9.0 on page 55 more information.
1. Press .
audit
displays.
2. Press twice.
Setpnt
displays.
3. Press . The lowest configured setpoint number displays.
4. Press to navigate to the desired setpoint number (1-8).
Only configured setpoint numbers display. Displayed setpoints are read only unless access is set to on.
See Section 4.4.8 on page 35 for the complete setpoint menu.
5. Press .
value
displays.
6. Press again to view the current configured setpoint value.
7. To edit the setpoint value use the following method:
• Press to clear the current value
• Use the numeric keypad to enter the new value and press to accept it
• Press to accept the new value once correct
8. Press to return to weigh mode.
3.4.19 Reset Configuration
1. Access setup mode via the setup jumper ( Figure 4-1 on page 21 ).
Config
displays.
2. Press .
dfltcfg
displays.
3. Press .
no
displays.
4. Press .
yes
displays.
5. Press or to reset the configuration setting.
ok
displays.
6. Press or .
no
displays again.
7. Press to return to weigh mode.
Note
Note