Rice Lake SURVIVOR OTR Series, Руководство по установке

Страница: 16 / 36

SURVIVOR OTR Flattop Truck Scale
12 Visit our website www.RiceLake.com
6. Ensure the link for any binding or misalignment and the link is plumb in respect to the upper blocks
• Check that the link is centered between the side of the link and the upper blocks
If needed, tap the edge of the baseplate with a hammer to make minor adjustments in alignment.
Figure 4-7. Recheck Link for Binding
7. Jack the weigh module and remove the setting blocks.
8. Slowly lower the weigh module until it rests on the load cell links.
9. Use an industrial hammer drill to drill a 3/4'' hole into the concrete at least 6'' deep on one side of the baseplate.
Figure 4-8. Drill Anchor Bolt Holes
10. Drill a second anchor bolt hole on the opposite side of the baseplate. Each mount requires two anchor bolts to prevent
longitudinal motion of the baseplate.
• Anchor bolts (7'' x 3/4'') with expansion heads are supplied with the scale.
Figure 4-9. Anchor Bolts with Washers
Note