Ishida Uni-7 & Uni-5 Touch Screen Scale and Printer Setup Manual
Rev 4, B0674R / B0664J, March 2014
9
Uni-7+5_Setup_Manual
Figure 3.1.
Memory Clear
7. Press the
RETURN ARROW
(top right).
8. Press the
OPERATION ICON
(lower right) to return to Normal Operation mode.
9. If the Date/Time confirmation screen is displayed, press
ENTER
.
10. Memory Clear is complete.
11. Proceed to the Basic Configuration section below to set the scale to USA, etc.
3. Basic Configuration
After loading new firmware the Uni-7 and Uni-5 scales default to a European format. This is seen
on the main display where the weight units are "kg" and the decimal points are replaced by
commas. Use these steps to restore the scale to USA settings.
1. Press the
MODE
key to enter the Main menu.
2. Enter
495344
and press the
PLU
key to access hidden menu steps.
3. Press the
SETUP
menu button.
4. Scroll down and select
COUNTRY
(page 5/6).
5. Confirm
ENGLISH
is selected.
See Figure 2.1.
6. Enter
951753
and press the
PLU
key to access
COUNTRY SELECT
.
7. Select
USA
.
See Figure 2.1.
Figure 2.1.
Country Select: USA
