Ishida Uni-7 & Uni-5 Touch Screen Scale and Printer Setup Manual
Rev 4, B0674R / B0664J, March 2014
11
Uni-7+5_Setup_Manual
Figure 4.1.
Enter IP Address, Subnet, and Gateway
9. Select the
PC COM
tab.
10. Enter a computer IP Address to be used for comms testing from the scale (ping). Press
the
PC IP ADDRESS
field.
See Figure 4.2.
Note
: The PC IP Address is only used by the scale to ping another device on the network.
If the PC address is blocked by a firewall or anti-virus software enter the address of
a different device such as an access point or another scale that will respond to a
ping request.
11. Set the
COM CHECK PERIOD
= 600 (10 minutes).
Note
: If the Com Check Period is set to zero the on-line indicator on the main operation
screen will always show as connected (blue) even when there is no connection.
12. Do not change the Port Number (8071) or Comm Check Time Out (2 seconds) unless
instructed to do so by Rice Lake Weighing Systems technical support.
Figure 4.2.
Enter the Computer's IP Address and the Comms Check Period
Do not proceed to the WiFi tab to configure the wireless option.
The scale must reboot to save the standard Ethernet settings
before continuing. If the wireless settings are entered without
rebooting, the scale will not communicate.
