Rice Lake IQ plus 210, Руководство по установке

Страница: 22 / 36

IQ plus 210 Installation Manual
16 Visit our website www.RiceLake.com
3.2.3 Calibration Menu
See Section 4.0 on page 19 for calibration procedures.
Figure 3-8. Calibration Menu
UNITS LB
KG
OZ
G
LB/OZ
Specifies primary units for displayed and printed weight. Values are: LB=pound; KG=kilogram; OZ=ounce;
G=gram; LB/OZ=pounds and ounces.
Alternate Units (ALTUNT Parameter)
LB
KG
OZ
G
LB/OZ
ON
OFF
Alternate units. Determines which units are displayed when the UNITS button is pressed. The value for the
primary unit (selected on the PRIMAR parameter) is always ON.
NOTE: The LB/OZ setting is not a Legal-for-Trade setting.
CALIBR Menu
Parameter Choices Description
Level 2 submenus
WZERO — Display and edit the zero calibration A/D count value.
WVAL — Display and edit the test weight value.
WSPAN — Display and edit the span calibration A/D count value.
REZERO — Press ENTER to remove an offset value from the zero and span calibrations.
Use this parameter only after WZERO and WSPAN have been set. See Section 4.0 on page 19 for more informa -
tion about using this parameter.
Table 3-4. Calibration Menu Parameters
FORMAT Menu
Parameter Choices Description
Table 3-3. Format Menu Parameters (Continued)
WZERO
*CAL*
Display and edit
zero calibration
A/D count value
Display and edit
test weight value
WVAL
*CAL*
Display and edit
span calibration
A/D count value
WSPAN
*
CAL*
Press Enter to
remove offset from
zero and span
calibrations
REZERO
XXXXXXX XXXXXXX
VERS DEFLT DIG IN
SERIAL CALIBR CONFIG FORMAT