Rice Lake Dyna-Link 2 MSI-7300, Техническое руководство

Страница: 5 / 40

Introduction 1
1.0 Introduction
The Dyna-Link 2 is a reliable, accurate, easy to operate, multipurpose tension dynamometer. Designed with safety
factors exceeding the industry standard, the unit is ideal for situations in which headroom is at a minimum. The
unit is fully sealed for outdoor use in any weather.
A remote display option is available to further enhance the safety and usability of the Dyna-Link 2 . The optional
RF remote display allows tension monitoring from a distance and adds the ability to print and store data.
Manuals can viewed or downloaded from the Rice Lake Weighing Systems website at www.ricelake.com
Warranty information can be found on the website at www.ricelake.com/warranties
1.1 Features
• Designed to meet or exceed all U.S. and International safety and environmental standards.
• Greater than 150 hours operation with two standard Alkaline C cells. Greater than 300 hours with two
standard Alkaline D Cells (25000 lb/12500 kg capacities and above). Also works with off the shelf NiMH
rechargeable cell batteries.
• Automatic power off conserves battery life by turning the unit off when sensing no activity for a set time.
• Rugged construction throughout. IP65/NEMA Type 4 for outdoor use.
• Designed for use with U.S. made Crosby shackles (optional).
• Shackle holes reinforced with steel sleeves (25000 lb/12500 kg capacities and above) to reduce wear.
• Shackle stops ensure ease of mounting. The stops prevent the shackles from falling to the side of the unit and
are held in position for easy rigging.
• ScaleCore technology provides precision, high resolution (2500 division standard, up to 10,000 possible) 24
bit A/D conversion coupled with an advanced RISC micro-controller. ScaleCore technology provides quick
and easy firmware updates, setup, calibration and backup.
• Five, 1.22'' (31 mm) LCD digits for clear tension readings from a distance. Six digits, 1'' (26 mm) on units
100,000 lb and over.
• Easy to maintain. Full digital calibration ensures reliable, repeatable measurements. Can be calibrated without
test weights using C-Cal technology.
• Selectable kg/lb/tons (U.S. Short)/metric tons/kilonewtons.
• Automatic or manual weight totalization for loading operations.
• Easily customized for special applications.
• Hi speed peak mode for stress and drop test analysis.
• Two setpoints can be set for any in-range tension/weight value for operator alerts or process control. Optional
audible alarm output.
• Two service counters ensure load train safety by warning the user to perform safety checks when the lift count
gets high or the Dyna-Link 2 has been overloaded repeatedly. Counter 1 (Lift Count) records the number of
lifts above 25% of capacity. Counter 2 (Overload Count) records the number of times the unit was
overloaded.