Rice Lake Dyna-Link 2 MSI-7300, Техническое руководство

Страница: 13 / 40

Setup 9
4.2 Function Keys
There are two function keys,
F1
and
F2
on the front panel of the Dyna-Link 2 . These keys can be programmed to
several different functions. See Table 4-1 on page 8 for available functions.
To assign the
F-keys
:
Note
1. Press and simultaneously to enter parameter setup menu.

displays.

To set

press again.
2. Press to enter
F-key
set up.
3. Press to scroll through the settings.
4. Press to select the desired choice and return to the parameter menu.
5. Press to save.

displays briefly and the Dyna-Link 2 returns to the weigh mode.
This procedure also assigns the F1 & F2 keys on the optional RF remote display.
4.2.1 Off
When the
F-Key
parameter is set to

, there is no user key function assigned and the
F-Key
is disabled.
4.2.2 Test
Set an
F-Key
as test (Section 4.2 on page 9). To run a test, press the
Test F-Key
and the display will automatically
scroll through the following:
• Light all LCD segments and the LEDs
•

followed by the version number
•

followed by the battery level in volts
•

followed by counting from 00000 to 99999
•

followed by the c-cal value
The test can be single stepped by:
1. Press the
Test F-key
and then immediately press the key to stop the auto scroll.
2. Press to scroll through each step and press to view the step value.
Internal tests are also performed and if any test fails, an error code will display. See Section 7.1.1 on page 29 for a
description of all error codes. Press to stop the test at any time.
Unit lb
kg
Ton
MTon
kN
Weight Units – sets the weight units displayed. See Section 4.7 on page 14.
b.LiFE


Battery Life – sets the options for standard or extended battery life. See Section 4.8 on page 15.
Parameter Settings Description
Table 4-1. Setup Menu Parameters (Continued)
F2
F2
F1
F2
F1
F2
F2 F1