Rice Lake DMC-782, Руководство по эксплуатации

Страница: 26 / 36

22 DMC-782 Operation Manual
Start with the scale in the Weighing Mode.
1. Press the key for the value of the coin or token you wish to count. (Example: To count dimes, press the
10 cents key.)
2. Put the coins or tokens on the scale platform. The display will show the weight, denomination, and total
value of the coins or tokens on the scale.
To switch the display to show the number of coins or tokens rather than their total value, press the
QTY/AMT
key.
To return the display to visualize total value, press the
QTY/AMT
key.
3. Press the + key to add the total value of the first denomination to the accumulator. The
MEM
annunciator
will illuminate, indicating that there is accumulation data in memory. If the display is in Quantity mode
instead of AMT mode, you will hear an error beep because a quantity cannot be accumulated. Switch the
display back to visualizing total value by pressing the
QTY/AMT
key and then pressing the + key again.
The display will show the total value accumulated so far.
4. Remove the coins of the first denomination from the platform. Press the
CLEAR
key to clear the
previous data from the display.
5. Press the preset key for the next denomination coin or token to be accumulated (Example: the 5 cent key
for nickels). This can be either one of the denomination keys preprogrammed on the scale or one of the
preset keys programmed for a custom coin or token by following the instructions in Section 6.0.
6. Press the
CLEAR
key to clear the coin data.
7. Place the coins to tokens of the next denomination on the scale platform. The display will show the
weight, denomination, and total value of the coins or tokens now on the scale.