Rice Lake DMC-782, Руководство по эксплуатации

Страница: 25 / 36

Scale Operations 21
To switch the display to show the number of coins or tokens rather than their total value, press the
QTY/AMT
key.
To return the display to visualize total value, press the
QTY/AMT
key.
3. When done with the coin counting operation, remove the coins or tokens from the scale platter. Press the
CLEAR
key to clear the data recalled.
5.2.2 Basic Coin Counting Using One-Touch Tare
Start with the scale in the Weighing Mode.
1. Press the key for the value of the coin or token you wish to count. (Example: To count dimes, press the
10 cents key.)
2. Place the empty container (cash drawer, bin, bucket, bag or tote) on the scale and press the
TARE
key
3. Place the coins or tokens in the container on the scale platform. The display will show the weight,
denomination, and total value of the coins or tokens on the scale.
To switch the display to show the number of coins or tokens rather than their total value, press the
QTY/AMT
key.
To return the display to visualize total value, press the
QTY/AMT
key.
4. When done with the coin counting operation, remove the container of coins or tokens from the scale
platter. Press the
CLEAR
key to clear the data recalled.
5.2.3 Coin Counting - Accumulating More Than One Denomination
When SPEC 30, Bit 0 is set to 0: Allow, you can accumulate a total of more than one denomination by
sequentially putting the coins or tokens on the platform and using the accumulation
+ key and subtraction key -
as described below. If SPEC 30, Bit 0 is set to 1: Inhibit, if you try to change the denomination of the coins or
tokens the scale will emit an error beep.