Rice Lake DMC-782, Руководство по эксплуатации

Страница: 10 / 36

Leveling
Bubble
6 DMC-782 Operation Manual
Figure 2-1. Leveling Bubble
2.4 Powering Up the DMC-782
The DMC-782 can be operated either from an AC power source or with a rechargeable battery pack (DC power).
The DC power allows the unit to be completely portable. Instructions for DC operation are contained in
Section 2.4.2.
2.4.1 AC Power Source
Important
Do not turn the scale upside down. Always work with the scale on its side. Damage to the load cell can
occur if the scale is turned upside down.
To power up the DMC-782 using the AC power cord:
1. Connect the AC power cord under the scale base as shown in Figure 2-2.
Figure 2-2. AC Plug-in Location on Underside of DMC-782
2. Plug the AC power cord into a grounded 115 VAC receptacle.
3. Press the
ON/OFF
key located on the front of the scale. The scale will run through a check of the LCD
display’s segments. How thorough the segment check is depends on the setting of SPEC 20, Bit 2. The
default is 0: Fast (For further instructions on how to set the scale’s specifications, see Section 3.2.1):
•
If SPEC 20, Bit 2 is set to 0: Fast, the scale display’s 888’s for 1.5 seconds, then blanks for 1.5