Rice Lake DMC-782, Руководство по эксплуатации

Страница: 24 / 36

Note
20 DMC-782 Operation Manual
For digital tare entry, the decimal must be in the appropriate place as it would be displayed in the
weight display. For example, .250 would be entered as 0.250, not .250. The weight display shows
weight entered with a negative sign indicating that it is a tare weight.
5.1.3 Recalling a Preset Tare
The following procedure allows you to recall a tare previously programmed to a preset key. For information on
how to program a preset tare, see Section 6.4 on page 26.
1. Press the
RECALL TARE
key to enter into the Recall Tare mode.
2. Press the preset key to which you previously programmed a tare weight. (Example: press the F19 key.)
The alarm beeps twice and the tare that you programmed to this key appears in the
Weight
display.
3. You can now proceed to carry out a weighing operation or press the
TARE
key to clear the tare weight.
5.1.4 Tare Addition or Subtraction
Two tares can be accumulated or subtracted using the
TARE
key as well. Tare weights cannot be accumulated or
subtracted by digital entry.
Note
SPEC 25, Bits 2 and 1 must be set to 00 to enable Tare Accumulation and Tare Subtraction. (For further
instructions on how to set the specifications, see Section 3.2.1)
1. Place the cash drawer, coin bin or box to be tared on the platform and press the
TARE
key. The weight
display should show 0, the
Net
annunicator will illuminate and the tare weight will appear in the Tare
display.
2. Place another tare weight on the platform and press the
TARE
key again. This will add the two tare
weights together (Tare Addition).
3. Tare weights can be subtracted individually by removing one from the platform and pressing the
TARE
key again. To clear all the tare weights and return to the Weighing Mode, remove all the tare weights and
press the
TARE
key. The
Net
annunicator will no longer be lit.
5.2 Coin Counting Operations
The following sections describe ways to carry out coin, bill or token counting.
5.2.1 Basic Coin Counting
Start with the scale in the Weighing Mode.
1. Press the key for the value of the coin or token you wish to count. (Example: To count dimes, press the
10 cents key.)
2. Place the coins or tokens on the scale platform. The display will show the weight, denomination, and
total value of the coins or tokens on the scale.