Page 27
CAUTION: Unplug the vacuum cleaner before servicing
NOTE: The blue seals cannot be used on any RSL1 or RSL2 made prior to the use of the blue seals.
1. Access and remove the motor as shown on page 22,
Section II. Maintenance, J. Accessing the Motor
2. Remove the fan as shown on page 24,
Section II Maintenance, L. Replacing the Motor Fan
.
3. Peel off the seal behind the motor fan and the fan duct cover seal. (Fig. A)
4. Clean both areas of all residue and replace seals. (Fig. B)
Fig. A
Fig. B
Fig. C
CAUTION: Unplug the vacuum cleaner before servicing.
1. Start by following the instructions to remove the motor on page 22,
Section II. Maintenance, J.
Accessing the Motor
2. Remove the two screws securing the red upright stop. (Fig. C)
3. Install new upright stop using the two screws.
4. For ease of operation, add a dab of lithium grease to the catch on the upright stop.
5. Reassemble the vacuum.
II. Maintenance
N. Replacing the Motor Seals
O. Replacing the Upright Stop
