Page 24
If a foreign object is caught in the vacuum a clog may form. If the vacuum is clogged a decrease in
cleaning performance may occur.To remove a clog, follow the steps below:
CAUTION: Unplug the vacuum cleaner before servicing.
1. Access the motor as shown on page 22,
Section II. J. Maintenance, Accessing the Motor
2. Check the handle duct for clogs.
3. Any clogs can be removed by running a stiff piece of wire or another object through the handle
duct.
4. If the handle duct is clear, remove the three screws for the fan duct cover and check the fan duct
5. for clogs. (Fig. A and B)
6. Reassemble the vacuum
Fig. A
Fig. B
II. Maintenance
K. Removing Clogs
