Page 12
CAUTION: Unplug the vacuum cleaner before servicing.
1. Remove the nozzle cover as shown on page 10,
II. Maintenance, B. Removing Nozzle Cover
2. Release the nozzle and flip the vacuum over so the bottom plate is showing.
3. Remove the baseplate by pressing the two tabs and pulling down. (Fig. A)
4. Remove the agitator.
5. Discard the old belt and place the new belt around the motor shaft.(Fig. B)
6. Loop the belt around the agitator and roll the agitator into place as shown. (Fig. C and D)
Fig. A
Fig. B
Fig. C
Fig. D
II. Maintenance
C. Replacing the Belt (RSL5, RSL5C)