Riccar Carpet Keeper, Руководство пользователя

Страница: 11 / 16

11
Cleaning Carpet and Rugs
Cleaning procedures
•
Vacuum thoroughly to remove dirt and
debris from the carpet and/or rugs.
• Use Riccar’s Pre-treatment
and Carpet Rejuvenator Spray to
loosen stains and rejuvenate carpet fibers.
• Hold bottle approximately 2 feet from
carpet. Lightly spray heavily soiled and
high-traffic areas. Wait at least 5 minutes
before treating entire carpet with dry
cleaning powder.
• Use Riccar’s Dry Carpet Cleaner
Powder. Sprinkle enough dry cleaning
powder to completely cover the area
according to the instructions on the
product’s packaging.
• Remove the storage tray from the bottom
of the applicator by pressing down on one
of the release tabs and lifting the
applicator up from the tray.
• Plug the applicator into an electrical outlet
and press the on/off pedal.
• Push the applicator in forward and
backward directional movements, then
rotate your position 90 degrees and
repeat. This cross pattern will activate the
cleaning powder and thoroughly work the
product into your carpet.
• Wait 30 minutes or until carpet is
completely dry, then vacuum up the dirt,
stains, allergens and activated cleaning
powder. Repeat if necessary.
H
I
I
L