14
User manual
CLEANING
The heating element, temperature sensors and water circulator enclosed inside the stainless steel
element cover are fragile and must be handled with care to prevent any damage or deformation to
these internal parts.
1- HOW TO REMOVE / INSTALL THE ELEMENT COVER
::
:
Unplug the appliance if it is plugged in.
::
:
To remove, rotate the stainless steel element cover left and slowly pull downward.
::
:
To install, attach the element cover back onto the lower part of the motor body. Align the four
dots around the element cover in between the four tabs at the bottom of the motor body. Turn
the element cover right to securely lock in place. A “click’’ is heard.
It is important to insert the
cover upright, with MIN and MAX indicators as shown in the below image. If the cover is not
reinstalled correctly, the water flow channels will not be in position to properly circulate
the water bath.
RIGHT ASSEMBLY
WRONG ASSEMBLY
NOTE:
Never operate the appliance with the stainless steel element cover removed. Always ensure
the element cover is properly installed before using the appliance.
Содержание 63406
Страница 2: ......
