RIB AA50110, Руководство пользователя

Страница: 29 / 60

29
G
B
J5 J4
J2
J3 J6 J7 J8
J17 J16 J14 J12 J13 J11 J15
J18
J10
J9
F1
F
N
J1
J1 N F Power supply 230 Vac 50/60 Hz - external to the control
panel - (120 V 60 Hz upon request)
J2 SECONDARY
TRANSFORMER Connectors for secondary 18 Vac transformer
J3 BATTERY
CHARGER (24 V
DC SOLAR Connector for 24V battery charger board (code ACG4774
optional)
J4 MOTOR Connector for 24 Vdc motor and 5 Vdc encoder
J5 Connector for flasher 24Vdc (cod. ACG7061)
Pay attention to the polarity.
J6 A+ COM + 24Vdc accessories power supply
A- - 24Vdc accessories power supply
A+TEST + 24Vdc photocells self-test power supply
J7 R-AUX Auxiliary relay contact (NO) Max 700 W
SIGNAL Barrier opened warning light, operating signal with battery and
low battery (24Vdc 3W max)
COM A+ Contacts common / Positive 24 Vdc
J8 PHOTO 1 Photocells contact 1 (NC)
PHOTO 2 Photocells contact 2 (NC)
STOP STOP impulse contact (NC)
TLC Magnetic sensor contact for traffic light control in PARK mode
COM A+ Common contacts / Positive 24 Vdc
J9 SECURITY LOCK Connector for manual release switch
(factory connected - DO NOT REMOVE!)
J10 OPEN 1 Opening impulse contact (NO) - to enter
OPEN 2 Opening impulse contact (NO) - to exit
CLOSE Closing impulse contact (NO)
START Single pulse contact (NO)
B.I.O. Contact (NO) dedicated to a timer
OK CLOSE Contact for closing confirmation in PARK mode
COM A+ Common contacts / Positive 24 Vdc
J11
RS485 termination of J12
J12 APP+ Connector for APP+ card
J13 APP Connector for APP card
J14 SERIAL COM /
SYNC Connector for serial connection
J15 RADIO Connector for radio receiver RIB, 24 Vdc supply
J16 RADIO Connector for radio module ACG8069
J17 433 MHz Radio antenna
J18 AUX CARD Card 1 relay connector (code ACQ9080) for management of
courtesy light.
Card 3 relay connector (code ACQ9081) for management of
courtesy light or traffic lights.
RUN Trimmer for high speed adjustment operations
TCA Trimmer for automatic closing time adjustment (DISABLED
DEFAULT AND DL9 LED OFF)
LOW SP.OP. Electronic regulator for low speed on approach in opening
LOW SP.CL. Electronic regulator for low speed on approach in closure
PROG Programming button
F1 T 2 A Transformer protection fuse (external to the card P1 24V)
F2 F10 A Fuse for motor protection