9
Func.
Name
Description
Range of
Setting
Unit Default
F_026
Deceleration Time
of Preset Speed 3
Deceleration time of preset speed 3.
0.0~
3200.0
0.1
sec
15.0
(Note5)
F_027
Secondary
Acceleration Time
Switch to secondary acceleration time by
multi-function input terminal.
F_028
Secondary
Deceleration Time
Switch to secondary deceleration time by
multi-function input terminal.
F_029
Set S-curve for
Accel/Decel Time
Set S-curve to slow the acceleration and deceleration
time at start and stop.
0.0~5.0 0.1sec
0.0
F_030
Limitation of Output
Voltage
0: Output voltage of V/F pattern is not limited,
decrease the swithching frequency.
1: Output voltage of V/F pattern is limited, decrease
the swithching frequency.
2: The output voltage of V/F pattern is not limited.
3: The output voltage of V/F pattern is limited .
0~3
─
0
F_031
Maximum Output
Frequency
Maximum output frequency of drive.
0.1~400.0 0.1Hz
50.0
(Note1)
60.0
(Note2)
F_032 Starting Frequency
Starting frequency of drive’s output.
0.1~10.0 0.1Hz
0.5
F_033
Starting Voltage
The voltage corresponds to the output starting
frequency.
0.1~50.0
0.1V
8.0
(Note3)
0.1~100.0
12.0
(Note4)
F_034 Base Frequency
The frequency corresponds to the base voltage in V/F
pattern.
0.1~400.0 0.1Hz
50.0
(Note1)
60.0
(Note2)
F_035
Base Voltage
The voltage corresponds to the base frequency in V/F
pattern.
0.1~255.0
0.1V
220.0
(Note3)
0.1~510.0
380.0
(Note4)
F_036 V/F Frequency 1 Frequency at the first point of V/F pattern.
0.0~399.9 0.1Hz
0.0
F_037
V/F Voltage 1
Voltage at the first point of V/F pattern.
0.0~255.0
0.1V
0.0
0.0~510.0
F_038 V/F Frequency 2 Frequency at the second point of V/F pattern.
0.0~399.9 0.1Hz
0.0
F_039
V/F Voltage 2
Voltage at the second point of V/F pattern.
0.0~255.0
0.1V
0.0
0.0~510.0
F_040
Vin Gain
Analog input “Vin” gain ratio adjustment.
0.00~2.00 0.01
1.00
F_041
Vin Bias
Analog input “Vin” bias ratio adjustment.
-1.00~
1.00
0.01
0.00
F_042
Frequency Upper
Limit
The upper limit of output frequency=
F_031(Maximum Output Frequency )*F_042
0.00~1.00 0.01
1.00
F_043
Frequency Lower
Limit
The lower limit of output frequency=
F_031(Maximum Output Frequency )*F_043
0.00~1.00 0.01
0.00
F_044
Analog Output
Signal Selection
(FM+)
0:Output frequency
1:Frequency command
2:Output current
3:“Vin” analog input signal
4:“Iin” analog input signal
5:DC bus voltage
6.Output voltage
7:Hear sink temperature
0~7
─
0
F_045
Gain(FM+)
Analog output gain ratioadjustment.
0.00~2.00 0.01
1.00
F_046
Motor Overload
Protection (OL)
0: Disable
1: Overload protection for dependent cooling fan type
motor:Enabled(OL)
2: Overload protection for independent cooling fan
type motor: Enabled(OL)
0~2
─
1
F_047
Filter Setting of
Analog Input Signal
Filter the analog input signal when the frequency
command is controlled by analog input terminal.
(F_002=0).
0~255
─
20
F_048 Motor Rated Current Set the value according to the motor rated current.
10%~150%
of drive
rated
current
0.1A
According
to the
rated
current of
motor
F_049
Motor No-Load
Current
Set the value according to the
motor’s no-load
condition.
0~motor
rated
current
0.1A
1/3 motor
rated
current
