5
Pre-Alert (2 Stage) Car Body Impact Warning with ETS™
This special feature provides a two-stage impact sensing system. It gives the security conscious owner a sensitive car body impact
sensor that will give a potential thief prior warning that the vehicle is protected by this most formidable alarm system. On
detection of a low level impact i.e. from a tyre kick, the siren will simply beep for a few seconds to warn away the would-be thief. If
the vehicle is attacked any further, the system will move into full siren mode. The unique ETS™ Environment Tuned Sensor is able
to distinguish between environmental shocks caused by aircraft, trucks, or extreme weather conditions, and the impact caused by
any thief attempting to break in or other heavy impacts. Furthermore the system features the unique Rhino "Auto Adjust” process,
where during the 45 sec. arming delay, the alarm samples the background noise where the vehicle is parked, and will if necessary
automatically reduce the sensitivity of the impact sensor to an appropriate level. This process allows a trouble free sensitivity that
ordinary alarms simply cannot provide. The sensitivity level reference point can be adjusted to suit your particular needs. Please
refer to the programming section contained later in this manual.
Auto Bypass
Auto bypass is designed to reduce false alarms caused by faulty switches or external sensors. If the alarm is triggered 3 times by
the same sector then the particular sector will be bypassed. (i.e. the sector will become inactive.) The sector will only be bypassed
for one arming period. The next time the system is armed the sector that was bypassed will again become active.
