RHINO RAMV2, Инструкция по эксплуатации

Страница: 27 / 40

27
3.3.1. Changing REGISTER 1
Vehicle Set Up: A
LL
D
OORS
C
LOSED
, B
ONNET
C
LOSED
, A
ND
T
HE
I
GNITION
T
URNED
O
N
L
AST
Remote Key action : T
URN
O
N
/ O
FF
F
EATURES
V
IA
T
HE
B
OTTOM
B
UTTON
O
N
T
HE
R
EMOTE
PROGRAMMABLE
FEATURE
Press
Remote
This
Many
Times
INITIAL
FACTOR
Y
SETTIN
G
DESCRIPTION
Arming Beep 1 ON 1 Beep on Arm
Disarm Beep 2 ON 2 Beeps on Disarm
Auxiliary Detection 3 ON Activate Ultrasonics, Microwave if
fitted.
Shock Sensor 4 ON Activate Two Stage Shock Sensor.
Passive Arm 5 OFF System arms automatically 90
seconds after exit - the doors will
not lock.
Auto Re-arm 6 OFF If system is disarmed and a door is
not opened within 60 seconds, the
system will rearm & relock.
Lock Pulse on Alarm
Trigger 7 OFF When the alarm is triggered, the
doors will be sent a lock pulse. ie
the would be thief picks the door
lock, the alarm triggers on voltage
drop due to the central locking
operating, then the doors
immediately re-lock to foil the would
be thief.
Not Used 8 OFF
Shock Sensor
Adjustment 9 6
SELECT
the level
required.
After pressing the remote 9 times to
enter this mode, turn the ignition to
off. There are 8 levels of
adjustment. The factory default
setting is level 6. Pressing the
remote once will increase the
sensitivity by one level ie to level 7.
The LED will then flash seven times
to confirm the new level. Pressing
the remote again will increase the
sensitivity to level 8 (max). Pressing
the remote again will return the
adjustment to level 1(least
sensitive). Once you have adjusted
the sensitivity level to the desired
setting, turn the ignition on to exit
this mode.