RHINO RAMV2, Инструкция по эксплуатации, Страница: 30 / 40

30
3.4. Phone Number Memory
The Rhino RAM alarm is able to be programmed with up to 5 different mobile phones,
so when the alarm is armed or put in to panic mode and activates it will send a SMS
message to each of the phone numbers in the systems memory.
3.4.1. To Read Phone Numbers From The System
BY SMS ONLY
Type your PIN number and READPHONE , and send it to your alarm you can find
out the different mobile numbers that are programmed into the system.
(WHERE 123456 = YOUR PIN NUMBER)
You will then receive a reply SMS message
back stating all the phone numbers in the alarm
systems memory.
E.G.
Phone Numbers:
1: 0409986655, 2: 040411689, 3: Not Used, 4: Not Used, 5: 0414222345
3.4.2. To Erase Phone Numbers From The System
BY SMS ONLY
There are 5 memory locations for mobile phones. Type your PIN number and
ERASEPHONEX , and send it to your alarm you can erase the mobile phone number
that is stored in the location identified by ‘X’ in the alarm system.
EG: 123456ERASEPHONE3 – will erase the phone number stored in location 3 in the
alarm memory.
You will then receive a reply SMS message
back stating all the phone numbers that are
stored in the alarm systems.
E.G.
Phone Numbers: 1: 0409986655, 2: Not Used, 3: Not Used, 4: Not Used, 5: 0414222345
123456READPHONE
123456
ERASEPHONE4
123456
READPHONE
123456
ERASEPHONE4