RHINO RAMV2, Инструкция по эксплуатации

Страница: 16 / 40

16
123456ARM
or
123456A
2.8. SMS Command Messages
Refer to your mobile phones user manual on how to write SMS messages.
2.8.1. To Arm The Alarm
NOTE: From the siren you will hear:
1 Beep for Normal Arming
3 Beeps for No Coverage warning
Constant Beeps for 3 seconds for Door Ajar warning
BY SMS BY REMOTE CONTROL
ARM: Type your PIN number and
ARM from a mobile phone, and send it
to the alarm.
(WHERE 123456 = YOUR PIN NUMBER)
NOTE: For the ARM command you can
use the letter ‘A’ instead of ‘ARM’.
You will receive a reply SMS message
back informing you of the state of the
alarm.
OTHER REPLY’S MAY INCLUDE:
Alarm already armed
Alarm unable to arm. Ignition on!
Alarm armed. Door Ajar
warning!
Alarm armed. Boot warning!
Alarm armed. Bonnet warning!
Alarm armed. Aux warning!
Pressing the Bottom button on the remote
control arms the alarm. The blinkers will
flash once, and the siren will beep once.
The dash LED-light will stay on for 20
seconds then flash,
THE ALARM IS
NOW ON.
NOTE:
For audible arm / disarm press the Bottom
button.
For
silent arm / disarm press BOTH
Bottom & Left buttons.
ALARM ARMED
ALARM ARMED