RHINO RAMV2, Инструкция по эксплуатации

Страница: 12 / 40

12
2.2.2. Installing the Glass Break Microphone
The glass break microphone is permanently attached to the
RAM via a 1-metre length of shielded audio wire. This wire
must not be cut or modified in any way.
The microphone must be mounted on the front of the dashboard.
Be sure to mount the microphone in a place where it will not be
bumped or damaged from persons in the vehicle. There is a clip
attached to microphone to assist in mounting the microphone to
the front of the dashboard.
The RAM incorporates an intelligent glass break sensing system. This inbuilt device
will trigger the alarm system, provided it registers the correct sound frequency
parameters for breaking glass & that the impact sensor also registers a corresponding
impact to the vehicle. This ensures accurate detection of glass breakage. This trigger
activation will be sent as ‘GLASS’ in a SMS alert message.
2.3. Installing & Wiring the Siren
Installing the Siren
Figure 3
The Siren is normally mounted to the firewall inside
the engine bay of the vehicle.
See the figure which shows how the siren is mounted
using the mounting bracket and accessories supplied.