05.28. programming
terminals
reading and writing
terminals:
read-only terminal:
the XX micro vending machine is not complete with a display; to
display and programme the machine data, such as configuration
ones, use the external terminals necessary for these operations;
these three terminals shall be connected in the connector in the
right side of the cover (see 05.13.) when the machine is off;
they have different characteristics and possibilities:
MT1
0020040327CL TERMINALE "MT1"
to programme all machine parameters by means of its keyboard
and display; press key “P” to access and quit the programming
mode; press key “T” to confirm some values you have entered (see
e.g. 09.01.h. product de-counter “product qty”);
MT2-A (red)
0020040331CL TERMINALE "MT2-A"
press the key at the bottom at the back (its action is the same
as key “P” of MT1) to achieve the same functionalities as terminal
MT1 by using the machine keyboard for programming purposes
(see 05.02.);
MT2-B (black)
0020040326CL TERMINALE "MT2-B"
press the key at the bottom at the back to read the number of
total and partial dispensing cycles;
P
T
P
T
MAN1890105 rel. 02 dated 08.03.2017
page no. 19 of 38
www.rheavendors.com tel: 0039 02 966 551 fax: 0039 02 96 55 086 e mail: [email protected]
rheavendors group's sole property
XX micro by
