RH CGS-240, Руководство пользователя

Страница: 141 / 148

RHS Plateau Software
CGS-240 Manual 6/15/2021
Page 141 of 148
Figure 5.24
After a moment this will display your reference and UUT data on a plot, as shown in Figure 5.23.
10.4 EVALUATING FOR PLATEAUS
Once a reference and UUT data set have been selected and plotted,
plateaus can be evaluated by pressing the
Evaluate button. Additionally,
there are multiple options with which you can further specify what is
considered a plateau with respect to a given data set. To understand these
options, refer to the ‘Intro’ section under reference #5. Upon evaluation, a
pop-up window will display the number of plateaus detected.
On the graph interface a number of colored boxes representing each of the plateaus will appear, as shown in
Figure 5.25. To view these more closely it is possible to zoom in on the graph until only the plateau data is shown.
Figure 5.23