RH CGS-240, Руководство пользователя

Страница: 15 / 148

Installation
CGS-240 Manual 6/15/2021
Page 15 of 148
Enable the air compressor operation by turning on the lower cabinet rear
power switch.
Open the lower front cabinet doors and ensure the red knob on the top of the
compressor pressure switch is in the ON position. The air compressor should
begin running and continue until its maximum (cut-out) pressure is achieved.
The current tank pressure is indicated on the tank mounted mechanical
pressure gauge. The air compressor will cycle between its lower (cut-in) and
upper (cut-out) factory pressure settings.
Ensure the orange pneumatic valve is also in the OPEN position, with its arrow
in-line with the hose connections and pointing away from the air compressor.
Adjust the pressure regulator at the back of the unit to approximately 50-55 psi, see section 7.1.5.3.
Figure 3.2
Figure 3.4 "OFF"
Figure 3.3
Figure 3.3 "ON"
Figure 3.4
Figure 3.6 "OPEN"
Figure 3.5 "CLOSED"