Issue No: SQCA1 2010
19
NOTE
: there are 5 holes for adjustment. Each hole is spaced 25mm apart. End height
depends on the customer’s order specification.
4.10.2. ADJUSTING FRONT SEAT HEIGHT
Follow the steps below to adjust the FRONT seat height;
STEP 1: Release the 2 handles which secure the side guards.
STEP 2: Remove the 2 bolts, 4 plastic washers and 2 lock nuts from the left and right
pivot plates using two 10mm spanners.
STEP 3: Raise or lower the front seat height using the pivot plate or seat rail.
STEP 4: Hold in desired position and reverse steps 2.
STEP 5: Secure lock nuts
STEP 5: Secure the handles on the side guards.
Image 22: Rear seat height adjustment
STEP 1: Release 2
handles
STEP 2: Remove 2
locking pins
STEP 3: Adjust
using brace bar
STEP 4: Refit 2
locking pins
Image 23: Front seat height adjustment
STEP 1: Release
2 handles
STEP 3:
Raise/lower seat
STEP 2: Release
2 pivot plate bolts
