RGB Omicrom FT, Руководство по обслуживанию

Страница: 49 / 116

OMICROM FT
SERVICE MANUAL
21 September 1998
5.1
5. SCHEMATICS AND SPARE PARTS LIST
This chapter includes the schematics of the printed circuit boards used into the
Omicrom FT monitors and the spare parts list.
The PCB codes are the internal codes used in RGB MEDICAL DEVICES and they
must be used to order these boards as spare parts.
There are boards used into all models. These are:
•
P000PLAC04 (“CONTROTEMP 230395 Rev. 30”). Main board that
controls the communications between boards.
•
P000PLAC05 (“SUPPLY 200695 Rev. 03”). DC/DC Converter board.
•
P000PLAC07 (“CONECTOR 130598 Rev. 03”). Base board used to
interconnect the other boards.
•
P000PLAC14 (“PLANAR1 140197 Rev. 01”). Board that controls the
Planar display.
•
P000PLAC15 (“LEDFT 140197 Rev. 01”). Board with the LED’s.
The other boards are used to measure several vital signs and are used for each
model according to the next table:
Board A50 A31 A30 A21 A11
P000PLAC01
(NIBP and IBP)
√
P000PLAC10
(NIBP)
√ √
P000PLAC19
(Pulse Oximetry)
√ √ √ √
P000PLAC20
(ECG and Respiration)
√ √ √ √
5.1. Programmable devices.
The boards with microcontroller use an EPROM where the software program is
stored and, in some cases, use a PAL for the addressing. In this section it is
included the information about the versions and options available for each board.
P000PLAC01 BOARD.
•
U2 EPROM Code “T0000-00102 / 020798 Rev. 02”.
P000PLAC10 BOARD.
•
U2 EPROM Code “T0000-00202 / 020798 Rev. 02”.
P000PLAC14 BOARD.
•
U4 EPROM Code “D0000-00002 / 020798 Rev. 02”.