background image

      

                     Revision 2/2021                                     

 

14190 E. Jewell Avenue, Suite 4, Aurora CO 80012 - TEL: 303-366-1234 – Proudly Made in the USA 

www.rfidinc.com

 

Model 8075E Operations Manual v7.21 

42

 

 

 

Warranty 

RFID, Inc. products are warranted against defects in materials and workmanship for one (1) year from 
date of shipment.  RFID, Inc. shall, at its option, either repair or replace products that prove to be 
defective and are returned with freight prepaid to RFID, Inc.’s plant within the warranty period.  The 
foregoing warranty shall not apply to defects resulting from abuse, misuse, accident, alteration, neglect 
or unauthorized repair or installation. RFID, Inc. shall have the right of final determination as to the 
existence and cause of the defect. 

THE WARRANTY SET FORTH ABOVE IS EXCLUSIVE AND NO OTHER WARRANTY, 
WHETHER WRITTEN OR ORAL, IS EXPRESSED OR IMPLIED.  RFID, Inc. SPECIFICALLY 
DISCLAIMS THE IMPLIED WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A 
PARTICULAR PURPOSE.   

The remedies provided herein are Buyer's sole and exclusive remedies.  In no event shall RFID, Inc. be 
liable for direct, indirect, special, incidental or consequential damages, (including loss of profits) whether 
based on contract, tort, or any other legal theory. 

Содержание 8075E











































Отзывы: