RF Mogul RFM 1200, Руководство по эксплуатации

Страница: 5 / 27

4 | P a g e
R F M O G U L 3 6 0 4 V i a T e r r a S t S a l t L a k e C i t y , U T 8 4 1 1 5
R e v 5 / 2 0
S a l e s : 8 0 1 - 8 9 5 - 3 3 9 2 s a l e s @ r f m o g u l . c o m
PACKAGING
Remove 14 wood screws with flat washers around the base of the cardboard box that is
attached to the wood pallet. The cardboard box will lift up and off of the Pallet.
The system ships with 2 boxes. Inside the RFM Mount Box is the Mount Assembly (1.2M or
96CM), the Mounting Pan (secured to the Pallet), the Feed Glide Plate, 30’ Antenna Control
Cable (attached to connector box), Antenna Controller Box (includes antenna controller and
power supply). Also included is the Antenna mounting hardware usually wrapped against one
of the dish mounting arms.
The Antenna Mount Assembly weighs about 150 Lbs. (68Kgs). Depending on equipment
available, keep the Mount Assembly attached to the Pallet until it is ready to attach to the Roof
or other surface. Moving the Pallet/Mount Assembly to the roof is recommended.
The second box contains the Antenna Reflector. To protect the Antenna leave it inside the box
until it is ready to be attached to the Mount Assembly that is securely attached to the roof.