19 |
P a g e
R F M O G U L 3 6 0 4 V i a T e r r a S t S a l t L a k e C i t y , U T 8 4 1 1 5
R e v 5 / 2 0
S a l e s : 8 0 1 - 8 9 5 - 3 3 9 2 s a l e s @ r f m o g u l . c o m
When using an iDirect X5 Modem your Service Provider (ISP) will be able to provide you with
the Modem Address, Username, and Password. You will also need to know the Receive
Polarity.
Enter this information into the fields above. It
MUST
be correct, or the Antenna Controller will
not see the Modem. Contact your ISP or IT Manager for additional support concerning the
Modem setup.
After all changes are completed re-verify the modifications and then select the APPLY located in
the top right of this page. The system should return to the Main Status Page after updating.
Move the mouse to highlight
Configuration
then select
Dish Calibration
.
Select Start.
A Dish Calibration is required one time to complete installation and configuration.
Once completed the System is ready for use.
Содержание RFM 1200
Страница 1: ...RFM 960 1200 OPERATION MANUAL...