background image

26 | 

P a g e  

R F   M O G U L   3 6 0 4   V i a   T e r r a   S t   S a l t   L a k e   C i t y ,   U T   8 4 1 1 5  

R e v 5 / 2 0

 

 

S a l e s :   8 0 1 - 8 9 5 - 3 3 9 2   s a l e s @ r f m o g u l . c o m

               

 

 

NOT COVERED UNDER THIS WARRANTY 

A  component  or  product  that  has  been  damaged,  deteriorates,  malfunctions  or  fails  from:  improper 
installation,  misuse,  abuse,  neglect,  accident,  tampering,  modification  of  the  product  as  originally 
manufactured by RF Mogul in any manner whatsoever, removing or defacing any serial number, usage 
not in accordance with product instructions or acts of nature such as damage caused by wind, lightning, 
ice or corrosive environments such as salt spray and acid rain.  

It does not apply if the physical install of any RF Mogul Systems or components by a Technician that is an 
independent company not authorized by RF Mogul. The installer shall bear full responsibility for the entire 
installation process. 

The LNB (Low Noise Block Converter), and BUC (Block Up Converter), are NOT covered by RF Mogul. These 
items are shipped as a convenience to the installer and user and are not considered part of the RF Mogul 
system. 

Contact the bandwidth provider or integrator for warranty on these components.

  

RF Mogul does not cover expedited shipping charges. RF Mogul will ship ground freight using common 
carriers at their discretion.  

The RF Mogul antenna is inspected and tested at the factory before shipping. It is packed according to the 
standards required by shipping companies. If the antenna was received damaged, a claim should be made 
immediately with the shipping or forwarding company. 

This Limited Warranty also does not apply if the product becomes unable to perform its’ intended function 
in any way because of the television signal provider making any changes in technology or service.   

RF MOGUL DOES NOT ASSUME ANY LIABILITIES FOR ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, 
MADE BY ANY OTHER PERSON. ALL OTHER WARRANTIES WHETHER EXPRESS, IMPLIED OR STATUTORY 
INCLUDING  WARRANTIES  OF  FITNESS  FOR  A  PARTICULAR  PURPOSE  AND  MERCHANTABILITY  ARE 
LIMITED TO THE ONE-YEAR PERIOD OF THIS WARRANTY.  

In states that do not allow limitations on implied warranties, or the exclusion of limitation of incidental 
or consequential damages, the above limitations or exclusions do not apply. Some states do not allow 
limitations  on  how  long  an  implied  warranty  lasts,  or  the  exclusion  of  limitation  of  incidental  or 
consequential damages, so the above limitations or exclusions may not apply to you. This warranty 
gives Customer specific legal rights. Customer may also have other rights that may vary from state to 
state. SATELLITE RECEIVER WARRANTY See manufacturer’s limited warranty policy. 

 

 

 

Technical Support: 801-895-3308 Option 2  

 

Warrantor: RF Mogul 3604 Via Terra, Salt Lake City UT. 84115

 

[email protected]

 

 

Содержание RFM 1200




























Отзывы: