RF Mogul RFM 1200, Руководство по эксплуатации

Страница: 10 / 27

9 | P a g e
R F M O G U L 3 6 0 4 V i a T e r r a S t S a l t L a k e C i t y , U T 8 4 1 1 5
R e v 5 / 2 0
S a l e s : 8 0 1 - 8 9 5 - 3 3 9 2 s a l e s @ r f m o g u l . c o m
Antenna Control Cable wiring for the 12 POS Euro Style Connector
The Antenna Control Cable can be shortened to facilitate installation. We recommend keeping the cable
length at least 15’ long if possible. For future service keep an additional 3-foot cable loop behind the
antenna controller.
Run the Antenna Control Cable and the Coax Cables from the Roof though the roof entry box to the
Electronics compartment.
Place the Antenna Controller near other associated electronics (router, modem) and make necessary
connections for proper operation.
The DataSAT ACU-2 1RU Antenna Controller has five connections on the rear panel.
24 VDC Power Supply Antenna Control Cable Ethernet (LAN) RF Out RF In
Connect the External 24 Volt DC Power supply to the Antenna Controller and standard 100 to 220 VAC
outlets.
External 24 Volt DC Power Supply
12 - Tan – GPS RX Data In
11 - Pink – 15 to 18 VDC out to GPS
10 - White – GPS and Counter Input Common (Ground)
9 - Gray – Skew Count In
8 - Purple – Elevation Count In
7 - Blue – Azimuth Count In
6 - Green – Skew Motor Volts –
5 - Yellow – Skew Motor Volts +
4 - Orange – Elevation Motor Volts –
3 - Red –Elevation Motor Volts +
2 - Brown – Azimuth Motor Volts –
1 - Black – Azimuth Motor Volts +