RF Mogul RFM 1200, Руководство по эксплуатации

Страница: 14 / 27

13 | P a g e
R F M O G U L 3 6 0 4 V i a T e r r a S t S a l t L a k e C i t y , U T 8 4 1 1 5
R e v 5 / 2 0
S a l e s : 8 0 1 - 8 9 5 - 3 3 9 2 s a l e s @ r f m o g u l . c o m
With the Dish Reflector properly attached to the Antenna Mount and all procedures above completed
the system is ready for final wiring inside the Vehicle and system testing.
Use the DataSAT ACU-2 Controller Wiring-Configuration-Operation Manual to complete the installation.
After completion of system wiring before moving the Antenna automatically, one technician should
remain outside with a clear view of the Antenna and watch the Antenna Mount perform a Dish
Calibration. Check that the Antenna clears all roof objects and is secured to the roof.
When all tests are complete you should perform a final inspection of the roof installation, and then
apply the roof sealant (Dicor) on any exposed or open screws and roof holes.
Look for any loose tools or hardware before leaving the roof installation.