RF Innovations RFI-9256, Руководство по эксплуатации

Страница: 48 / 107

U S I N G I N T E R N A L M E N U C O M M A N D S
©
© ©
© RF Innovations Pty Ltd, 1998 Page: 46
223889, Revision 2.2
-------------------------- STATUS --------------------------
Unit Name:
Serial Number: 010141CF1297
Manufactured Date: 21/02/2000
RFI-9256
Version 1.22 Rev.A Australia
Build Date: Oct 20 2000 Time: 11:59:59
Unit is a MASTER
Point to Multipoint Dialup Connection
Network Address = 32
Rx Address = 20
Hopping Pattern = 19
Power setting = 30 dBm
RSSI trigger level = -60
Frame Time = 35 milliseconds
Max Tx bytes per frame = 221
Bias is Disabled
UNLOCKED
RSSI = 0 Noise floor = -137
Temperature = 42.5c
CRC32 = 715FA77A of size 127892 bytes
CRC check Correct
Press Any Key to return
Figure 6-34 Unit Status Display
(T) Test Indicator LEDs
Selecting this function starts a test of the front panel LEDs. This is a visual test and the LEDs must be
observed while this test is in progress. It simply turns the LEDs on and off operating using all the
colours in a predefined sequence.
(N) Show channel signal/noise
When this function is selected, a table in Figure 6-35 is displayed showing the signal and noise levels for
each channel used within that hopping pattern. The following table is an example of what is displayed.
The reading on the signal row is the RSSI (received signal strength indicator in dBm) of the radio for
each channel the unit operates on. If a ‘??’ is displayed as the signal value then there wasn’t a recent
sample for that channel.