REXROTH IndraDyn A Series страница 202 Скачать руководство пользователя

Страница: 202 / 220

12-2

Operating IndraDyn A Motors

Rexroth IndraDyn A

12.2 Deactivation

In the case of malfunctions, maintenance measures or to deactivate
the motors, proceed as follows:

1. Observe the instructions of the machine documentation.
2. Use the machine-side control commands to bring the drive to a

controlled standstill.

3. Switch off the power and control voltage of the drive controller.
4.

Only for MAD:

Switch off the motor protection switch for the motor

blower.

5. Switch off the main switch of the machine.
6. Secure the machine against accidental movements and against

unauthorized operation.

7. Wait for the discharge time of the electrical systems to expire and

then disconnect all electrical connections.

8. Before dismantling, secure the motor and blower unit against falling

or movements before disconnecting the mechanical connections.

9. Log all measures taken in the start-up report.

12.3 Dismantling

DANGER

Fatal injury due to errors in activating motors
and moving elements!

⇒

Do not work on unsecured and operating machines.

⇒

Secure the machine against accidental movements

and against unauthorized operation.

⇒

Before dismantling, secure the motor and feeder

against falling or movements before disconnecting
the mechanical connections.

1. Observe the instructions of the machine documentation.
2. Please heed the safety notes and carry out all steps as described in

the anterior instructions in the chapter ”Deactivation”.

3. Before dismantling, secure the motor and feeder against falling or

movements before disconnecting the mechanical connections. At the
MAF motor, also empty the coolant channels.

4. Dismantle the motor from the machine. Store the motor properly!
5. Document all done measures in the start-up report and machine

maintenance plan.

Содержание IndraDyn A Series





























































































































































































































Результаты поиска

Содержание IndraDyn A Series

Отзывы:

Похожие инструкции для IndraDyn A Series

Бренды по названию

Популярные бренды

REXROTH IndraDyn A Series, Руководство по планированию проекта

Результаты поиска

Содержание IndraDyn A Series

Отзывы:

Похожие инструкции для IndraDyn A Series

Бренды по названию

Популярные бренды