Band knife machine R750/R1000 – Instruction manual
Page
52 / 89
FPUH Rexel s.c.
ul. Radziwoja 11, 61-057 Poznań
tel.: +48 61 87 68 946
www.rexelpoland.com
8.
M
AINTENANCE SERVICE
The service consists in periodic checking of electrical connections,
especially protective conductors included in the power supply and control
system. Check the cutting band tension and its wear condition.
To ensure correct operation of the machine, daily inspections should be
carried out, consisting in a visual assessment of the correctness of their work.
Before starting maintenance, adjustments, repairs and other service
operations, disconnect the power supply using the main switch by moving it
to the OFF position and remove the power plug from the socket.
Performing any service work while the machine is running or connected
to power is forbidden!
8.1.
I
NSPECTION
During operation, it is recommended to carry out current inspections in
order to check the correct condition and functioning of the device in
accordance with the procedures in the company.
To ensure correct operation of the machine, daily inspections should be
carried out, consisting in a visual assessment of the correctness of their work.
The scope of performed activities includes:
Certainty of shutdown, control of the emergency switch,
Checking the cleanliness of the components (defects, cracks on the
cutting band),
Visual inspection of the equipment (cover damage, loosening or
missing screw connections, damaged cutting band etc.),
Possible adjustments.
The machine should be subjected to periodic inspections (suggested
frequency, every two months of two-shift work).
The scope of the activities performed includes:
Certainty of shutdown, control of the emergency switch,
